Flying’ Miata sway bars for ND:

02/09/2017 2:29 PM | Anonymous member (Administrator)

I purchased and installed the front and rear bars plus the end links from Flyin’ Miata. Installed them myself. The rear took about 20 minutes. The front took the rest of the day! Flying’ Miata’s instructions were accurate and logical. Seems like everything in front of the engine hangs off the fan shroud, which has to be removed to change the bar. Being careful and taking my time paid off. Everything went well with the install. I set the end links to the middle position (there are three) and am happy with the results.

By changing the bars but not the springs, the car rides normally on the road. No stiff ride or hitting the bump stops on rough roads. On the twisties, the car now handles like my previous Miatas. Corners flat, without suddenly breaking loose. Very predictable and worth the labor to install, in my opinion!

-Ken Johnson
2016 Ceramic GT

Address: PO Box 396, Portland, Oregon 97207

Email: zoomzoom [at]

Powered by Wild Apricot Membership Software